[P~K]Detroit_Irish Posted November 5, 2007 Report Posted November 5, 2007 as stated in my other thread ok so i grabbed a WRT150N.. now im beating my head against the wall trying to connect error the connection attempt has timed out return to the netwrok settings menu is going to be burned into my screen by the end of the week. I opened up the correct ports (10070-10080 tcp and 10070 udp) the linksys help line told me to assign it to 192.168.1.5 and its enabled... but still no lick, and all they tell me to do is call Sony Quote
TOW-19 Posted November 5, 2007 Report Posted November 5, 2007 You didn't heed my advice and grab a Buffalo instead................... Quote
[P~K]Detroit_Irish Posted November 5, 2007 Author Report Posted November 5, 2007 couldnt find one arond here, G/F needed ti "now" since she has homework and decided to move the office to the second floor, from the basement, where everything worked fine Quote
[OHM] COL.GRINDER Posted November 5, 2007 Report Posted November 5, 2007 I guess we just arent getting all the info we need to help you here. What are you connecting to your router? Wired or wireless? If wireless, WHY? If your router is going to be in your basement put it up as close to the cieling as possible if you have something upstairs running wireless. I have never had to open ports on a router to play socom with it. Try to stay away from wireless. Hard wired is by far better to assure no packet loss or collisions. You should be able to use the router with the default settings unless your modem is using an IP of 192.168.1.1 In that case you would set your router to 192.168.1.2 Make sure you have DHCP enabled so it will dish out IPs to all you computers and ps2 or ps3. Reset you cable modem then reset your router after the modem make sure your router is set to run mixed so you get the wired and wireless. Quote
DIGGLER Posted November 5, 2007 Report Posted November 5, 2007 Detroit, try this, I know it sounds to easy. I had problems with my router when I first got it. Come to find out my service provider would only allow on ISP address. So it was set to my computer before I got online to game. I couldn't go straight to my Playstation because it was a different IP address. Same thing with the router. I had to call my service provider and have them change the accepted IP adress to that of the router before I could use my playstation online. Hey just trying to help, no need to make fun LOL. The computer thing is not my gig good luck though, we missed you at the meeting last night Quote
[P~K]Detroit_Irish Posted November 6, 2007 Author Report Posted November 6, 2007 sorry guys forogt my laptop@ home today so no posting from work, as usual It is a wireless router, but i am using a wired connection for the PS2 PS2 was in port 2 w/ pc on 1 w/. the older router (stock sympatico) now no hard wired pc, PS2 nogo from port 2 or port 1 wifi signal is good where it is, w/ new router DHCP is enabled tried logging in/running setup disk w/ autosettings, wont connect Right now the only thing connectd to the router (aside from the modem) is the PS2 9wired connections) Quote
[P~K]Detroit_Irish Posted November 6, 2007 Author Report Posted November 6, 2007 Connection Type: PPPoE Login Status: Connected Internet IP Address: 70.54.xx.xxx Subnet Mask: 255.255.255.255 Default Gateway: 64.230.xxx.xxx DNS1: 207.164.xxx.xxx <- *primary DNS? DNS2: 67.69.xxx.xxx <- *Secondary DNS? DNS3: MTU: 1492 * = for manual setup in ps2 connection? if so i tried these and still nothing the IP address for the port am connected to (port 1) is 192.168.1.100 LMK if theres anything else i should do Quote
[P~K]Detroit_Irish Posted November 8, 2007 Author Report Posted November 8, 2007 fwiw got it resovled, although not the way intended using the sympatico router w/ wifi disabled linksys plugged into port 1 as a DHCP router and PS2 in port2 ty all for all your help & suggestions Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.